Articles | Moving On The Two Rein
Les helps riders who have taken their horses through the snaffle bit and hackamore progress to using the bosalito to train the horse's nose.
bosalito, choosing an appropriate bit, getting started
using the gear, basic neck reining, and how to how to
hold the reins are key topics in this second of the
three-part hands-on series
Sign up for Les's
The two rein phase is the third step in the process of bridling a horse the traditional Californio way. The first two steps are the snaffle bit phase and the hackamore phase.
Using the traditional method, the bridling process (moving from the hackamore or bosal into the bridle) should take at least a year of consistent riding and it could take longer. There is no hurry because this is the last phase of the horseís training and we want it to be done perfectly. A bridled horse is a work of art.
Keep in mind that in
both the snaffle bit phase and the hackamore phase we have probably made our fair share of mistakes. We hope that we learned from the mistakes we made in the snaffle bit phase and didnít repeat them in the hackamore. Because the hackamore works in a different way, with different pressure points we were able to make amends for and apologize for the snaffle bit mistakes.
The two rein bosal is the transitional phase between the hackamore and having the horse straight up in the bridle.
We start every new phase with a clean slate so we want to remember our past flaws and recover that lost ground by doing a better job with each phase. We are now entering the last phase, the phase that creates a horse who is straight up in the bridle.
What is the Two Rein?
So, what is the two rein
stage and why do we do it? The two rein stage is where we ride
the horse with a bosalito. This is a 3/8 inch, pencil-size bosal. It fits the nose of the horse the same way a regular hackamore does but its small diameter allows it to fit under the bridle. The bridle fits over the top of the bosal and the rider has two sets of reins.
Fitting the Bosalito
Even though the diameter
of the bosalito is much smaller than a regular hackamore you still want it to have a rawhide core with a lot of life to it. It should be shorter in length than the regular hackamore because we use a much smaller rope. The rope should be about 3/8 inch diameter also.
The bosalito should be shaped the same way we shaped our hackamore; you can find more info on the hackamore page of our website, so that it fits the nose properly.
The rope is tied on
exactly the same way you tie it on the hackamore. The headstall is just a leather strap that goes behind the ears, there is no brow band. The bosalito should be used in the same position as the hackamore because we want it to function exactly the same way.
Choosing the Bit
Our next job is to decide what bit we will put over the top of our bosal. It is important to remember that we are choosing our bit for a horse that has a Ďfreshí mouth.
A mid port mouthpiece.
We choose the bit according to our horseís conformation, his response to pressure or lack of same. I usually start a horse out in a medium mouth piece.
Mouth pieces come in
three powers, 1, 2, and 3; with 1 being cold and 3 being hot. The number 2 mouth piece is a really good place to start, you can go up or down from there.
We also need to consider
bit leverage; you can find more information about this on the
Choosing a Performax Bit page in the website's Tack Room. The horseís neck position is usually dictated by the leverage of the bit. Low leverage is leverage position 1, and high leverage is leverage position 3.
Checking the horse up in the bridle for the first time.
Leverage position 1 tends to lift the neck and shoulders for horses who are dumpy in the shoulders or maybe have a short neck. Leverage position 2 is for a horse that doesnít really have conformational difficulties. Leverage position 3 works well on the horse whose neck is set on a little higher. The higher leverage ratio will encourage him to drop his whole neck from just in front of the saddle all the way through the poll.
On a green bridle horse I will usually choose a bit that has some port to it. I like to start out with a bit thatís a number 2 in mouth power and a number 2 in leverage. As I said before you can always move up or down if you feel the need.
Many people like to
start out in a bit thatís a little too mild but that can be a trap. Starting the horse in a bit that is too soft or too mild will encourage a lack of respect from the horse. He will learn that he doesnít have to pay attention to it. That is the opposite of what we are after. We want the bit to produce the ultimate respect from the horse and not make him afraid. This is very important.
A really good quality bit is critical. The bit translates our message to the horse in a language that he can understand. A good bit is weighted and balanced so that it has pre-signal and signal, pre-load and load.
I like to use braided rawhide romal reins with 8 to 10 links of chain from the bit to the rein. The chain adds pre-signal and balance to the rein. You do see longer chains but I think 8 to 10 links are plenty, anything more is too long. Because I start a green horse in a port bit I have my curb strap pretty loose. I want the horse to operate off the bit and not the curb strap.
Holding the reins with a two rein bosal.
You probably wonít feel comfortable with quite that much bit but I would recommend a bit with an inch to an inch and a half port with a roller. You should adjust your curb strap so that if straight down is 1 and pulled all the way back is 10 it will only begin to intervene at 5.
As I said above this allows the horse to learn about the inner workings of the bit and understand it.
Getting Started with the Two Rein
You should put the two rein on one headstall at a time starting with the bosal. I put it on over the right ear but leave the headstall off the left ear. Then I put the bridle on over the top and put the hackamore headstall over the left ear at the same time as the bridle.
Why? Because leaving it
off one ear allows the bosal to hang slightly lower giving the horse more room to open his mouth for the bit. If I put the headstall of a correctly fitting bosal over both ears and then try to bridle my horse he is going to get an unpleasant surprise when he opens his mouth for the bit.
When taking off the two rein you reverse the process. First take both headstalls off over the left ear, and then take the bridle the rest of the way off followed by the bosal.
Once I have the bridle
on I take a small syringe (no needle) and squirt about 5cc of liquid glycerin into the horseís mouth. This is good lubrication and helps the bit to move smoothly. A moist, foamy mouth is much more comfortable for the horse than a dry one and I find that the glycerin really helps.
For his first day or two
in the two rein I will start by taking my horse to the round pen. I run the bridle reins through the hole in the front of the saddle up to the horn so that there is VERY soft pressure on the mouth. I donít chase him but I do move him around for a few minutes just to see how he reacts to the pressure.
This helps him to learn some of the pressure points of the bridle and to figure out some of the rules of the game on his own.
The essence of bridling the horse is that the horse respects the bit and stays off of it. The horse should feel as though he is trying to catch up to the bit. We should feel a cushion when we pull the bit straight back.
How do you hold the reins? Well, if you ask ten different people you will probably get ten different answers to this question. The bottom line is that there is no real right or wrong way to do it. You do always want to make sure that the bosal reins are on top.
I carry the reins in my left hand. I split the rawhide reins with four fingers and carry a coil of the little hair rope within the same four fingers. I also keep the left bosal rein slightly shorter than the rest.
Basic Neck Reining
The real definition of bridling a horse, as far as Iím concerned, is ďWill he neck rein and stay in the bridle?Ē
Neck rein means that if
I lay the rein softly across the horseís neck at a standstill
he doesnít really go anywhere. He bends his head and neck away from the neck rein to the point that his nose comes around to the toe of my boot. His forehead should stay perpendicular to the ground throughout the flexion. He should do this equally well to both sides and be able to go from right to left and left to right very quickly.
As we start out in the two rein we have a horse that we wish neck reined. At this point, if we lay the rein against the side of his neck and tighten the rein the horse will end up looking to the outside.
The essence of bridling
this way is somewhat forgotten and somewhat misunderstood. Our
two rein horse has an educated nose from his hackamore phase
and he has a green mouth. This mouth is a precious thing, if we make mistakes in this phase itís over. In the prior two phases of snaffle bit and hackamore training we should have weeded out our mistakes so that by this phase we know what to do and what not to do with our horse.
Now is our chance to make him better than heís ever been by taking more care, more time and more patience.
If we just lay our right
bridle rein against the horseís neck he has no real idea what
we want so we have to educate him. That is why we have the
bosal; it is kind of like training wheels on a
Start in the walk and lay the right rein against the horseís neck. Of course he really has no idea what we want by this so we take our left bosal rein and give him a soft pull, an educational pull to the left.
He understands this signal because of his hackamore training and flexes to the left. We match the pull on the left rein with left leg pressure from our boot top to encourage him to flex and bend. The bosal is there to show the horse the way.
Above & Below: Educating the horse to neck rein right and left. We donít want the horse to turn his whole body, we want him to flex his neck.
Asking him to bend his head around to the right we change the reins to the right hand, lay the left rein against his neck, pick up the bosal rein with the right hand and give a soft tug. Your right boot top encourages him to flex right.
For the horse to really understand this exercise you should do a lot of it every day. It isnít something you want to let just anyone do because it requires a lot of feel. As with all our exercises the release of pressure is the reward.
You have to spend a lot of time on this simple exercise because it dictates your end result. Iíve never overdone a horse on this exercise and Iíve done a lot of it. This exercise is one we can and should repeat over and over again.
It is very important to remember that we are NOT teaching the horse to change directions by neck reining; we are only concerned with moving the horseís head to the left or right.
When practicing this
exercise you will want to get your horse to the point where he
really bends about 90 degrees because when the horse is under pressure youíll probably get about half that and thatís about the amount you want. If you only ask him for 45 degrees now more than likely he will be too straight under pressure of a maneuver.
Left neck rein with all the reins in one hand - you do this by flexing your wrist.
The horse needs to be bent on his turns to the same degree he was when you were riding him in the snaffle bit in his maneuvers.
We teach the horse to
drop his nose straight back in the same way. We first ask with
the bridle rein and then re-enforce with the bosal straight back. We use both legs (boot tops) to encourage vertical flexion the same as in our snaffle bit and hackamore training phases.
We donít teach the horse
to do anything by doing the end result; we teach the horse by creating the proper form that allows the function as the horse progresses in his training.